[. . . ] Note:The severed plug must be disposed to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. ⭠Connect the brown wire to the terminal marked L or coloured red. [. . . ] For tracks on another disc, first select the required disc by pressing CD 1, CD 2, CD 3 or CDR. The set first searches backwards or forwards with sound at low volume, then speeds up with sound muted. Note: During palyback of a MP3 track, or Shuffle, Repeat Track or Programmed play, search is restricted to within the track being played at the time. Unless otherwise indicated operation of all other functions is the same for both MP3 CDs as well as for normal CD(RW)s. 1 Album selection and playback Rotate the ¡ EASY JOG TM control to select the required album number, then release the control. The album name is scrolled as soon as you release the ¡ EASY JOG TM control. Rotate the ¡ EASY JOG TM control to select the required track number, then release the control. The track name is scrolled as soon as you release the ¡ EASY JOG TM control. Notes: At the end of your album selection you will recognize an album called VARIOUS. This album contains all tracks, which have not been saved in an album when making the MP3-CD. If you wish to play a playlist, select it directly by rotating the ¡ EASY JOG TM control and then pressing PLAY/PAUSE 2/;. Auto level control becomes automatically active, when: ­ COMPILE CD is being used, ­ a disc, a track or a track edit is being high speed recorded and the CDR(W) has recordings on it, or ­ a program (consisting from more than one disc) from the CD changer is being high speed recorded. Auto level control will not become active, when: ­ using COPY CD, ­ making recordings from an external source, or ­ making normal recordings in listen mode. Make sure that the CDR(W) is absolutely free of scratches and dust particles. Else, DISC FULL is displayed and you cannot enter into the record mode. When a track with copy protected text is encountered TEXT PROTECT will be displayed. Copyright protection The Serial Copy Management System (SCMS) prevents the making of a digital copy from a digital copy. The system allows making a digital recording from the original, however in some countries this may require the authorization of copyright holders. When you try to record a copy protected material from an external source, COPY PROTECT will be displayed. When you try to record a copy protected material from the internal CD changer no digital recording is possible, however the CD recorder will automatically switch to analog recording. Switching ALC permanently off If necessary press STOP 9 to stop playback. You can adjust the reference record level for both digital and analog recordings from the internal changer as well as from external sources. [. . . ] Rotate the ¡ EASY JOG TM control until the display shows: ERASE TR and the track number (e. Rotate the ¡ EASY JOG TM control to select the track number(s) you wish to erase. Lights up and the remaining disc time and the remaining number of tracks are shown on the display. 1 Inserting a space Press 5 or 6 to move to the position where the space is to be inserted. [. . . ]